Know-how of different road markings used for traffic control

Are you driving? Have you put on your seatbelt? Do you follow the traffic light? Do you follow the traffic rules? Do you understand road signs? Do you know about road markings? No worries! We are here to help you understand the meaning of different road markings used for the safety and security of road users.

Road markings painted in white and yellow serves a useful purpose which you have been ignoring throughout your driving days. Safety and security of people cannot take a back seat. For this reason, traffic control companies Sydney turn up to regulate the movement of traffic on roads. These companies help in following these road markings to make the drive safe and smooth. 

Let’s understand what these broken & solid and yellow & white lines imply - 

1. Painted arrows

Painted arrows indicate drivers to which direction must be taken on the road. When there is more than one direction, you can go in the direction of either arrow. However, you need to signal another driver that you are going to turn even if the lane you are in turns only in one direction. Once you turn, stay in the same lane as you move from one road to the other.

2. Dividing lines

Dividing lines indicate that you can cross any dividing line when you are turning right at an intersection unless a sign tells you. You can even turn to the right across a dividing line to enter or exit a property like home, shops by the shortest route.

3. Painted islands

You should not drive on a section of painted road that is covered with double lines. You can drive on a painted island covered with single continuous or broken lines to enter or exit the road, and even you can enter a turning lane that begins immediately after the painted island for up to 50 meters.

4. Keep clear pavement marking

Keep clear pavement markings are painted in places, such as exits of ambulance and fire station to make sure their vehicles are not blocked when they are leaving on an emergency call. You should not stop between the lines marked across the road. These road markings might be used at some T-intersections to avoid queuing across the intersection.

5. Edge lines

These edge lines can be painted broken or unbroken that are marked to keep traffic off from soft road edges and breakdown lanes. You can drive across or outside edge lines for up to 100 meters only. 

6. Kerb lines

Kerb lines painted in yellow near the edge of the road to demonstrate that there are stopping restrictions and rules apply to that particular section of road.

7. Dragons Teeth

Dragons teeth is a painted series of triangular road markings that are placed in pairs on each side of a lane. These road markings increase the visibility of school zones for vehicle users and provide a constant emphasis to slow down to 40 km/h around schools.

Conclusion

Road markings are not the usual safety thing but may be the last thing to understand and follow. However, traffic control companies in Sydney, help vehicle users, to adhere to these rules. After all, safety and security, both are in your hands.